-
Specs
- Nanuk 960 Specification Sheet New (PDF)
- Nanuk 960 Fiche Technique Nouveau (PDF)
- Nanuk 960 Printing Template (PDF)
- NANUK Case Label Template | 905-960 (PDF)
- Nanuk Warranty Booklet (PDF)
- NANUK_Certifications
- NANUK Cases Internal Volume (PDF)
- Catalogue Nanuk 2018 EN
- Catalogue Nanuk 2018 FR
- Catalogue Plasticase 2018_EN
- Catalogue Plasticase 2018_FR
General Download
- Nanuk 960 2D Drawing (PDF)
- Nanuk 960 2D Drawing DXF (Zip)
- Nanuk 960 Inner Surfs Parasolid (Zip)
- Nanuk 960 Inner Surfs Step (Zip)
- Nanuk 960 Inner Surfs Iges (Zip)
- Nanuk 960 Aluminium Bezel Plates PDF (Zip)
- Nanuk 960 Aluminium Bezel Plates DXF (Zip)
- Nanuk 960 Lexan Bezel Plates PDF (Zip)
- Nanuk 960 Lexan Bezel Plates DXF (Zip)
- Nanuk 960 Cubed Foam Insert (PDF)
- Nanuk 960 Cubed Foam DXF (Zip)
- Nanuk 960 Custom Foam Template (PDF)
- Nanuk 960 Custom Foam Template DXF (Zip)
- Nanuk 960 Custom Foam Template 3D Step (Zip)
- Nanuk 960 Padded Divider (PDF)
Technical Download
- Interior Dimensions
L22.0 x W17.0 " x H12.9"
L559mm x W432mm x H328mm
- Exterior Dimensions
L25.4" x W20.0" x H14.5"
L645mm x W508mm x H368mm
- Weight (empty)
- 19.2 lbs | 8.7 kg
- Temperature Range
- Min -20°F (-29°C ) Max 140°F (60°C)
- Lid Depth
- 2.1" | 53mm
- Base Depth
- 10.8" | 274mm
- Material
- lightweight NK-7 polypropylene
- Max Buoyancy
- 167.6 lbs | 76 kg
- Watertight (Ip67)
- Yes
- Warranty
- conditional lifetime guarantee
- Certifications
- ATA 300 | ASTM D4169 | Mil-std-810f | IP67 Rating
- Internal Volume
- 2.79 cu.ft (79.0 L)
-
Features
PowerClaw Latching System
The PowerClaw latching system (US Patent No. 8,297,464) used on all NANUK cases is engineered to keep your case closed during the toughest of missions.
The PowerClaw clamps the case tightly closed using compressive force while the integrated slide lock prevents the case from opening during transport or when dropped.
The super tough nylon construction ensures your precious items remain safely inside the case no matter where the journey takes you.NANUK Waterproof Cases IP67 Rated (Submersion at 3ft for 30 min)
The waterproofing seal used in all NANUK watertight cases is custom designed to fit our products. The seal is designed to resist deformation and fatigue, ensuring a long lasting watertight seal.
Our waterproof cases are ideal for applications such as search and rescue, marine transportation / storage and diving. Any of our many dealers can easily outfit you with one of our waterproof cases, accessories or other products.
NANUK equipment cases and transportation products are complete with a lifetime guarantee in materials and workmanship for the life of our products.Impact Resistant NK-7 Resin
NANUK tough cases were designed with one objective in mind: survival. With rounded corners, thick wall construction and oversized details, NANUK durable hard sided cases are built to absorb the shocks without damaging the case or more importantly your contents.
Based on Plasticase’s years of experience in the plastics industry, our new NK-7 resin durable cases were developed specifically for the demanding conditions that NANUK will be exposed to. Highly impact resistant, lightweight, and rugged, our NK-7 resin tough hard sided cases can withstand nature’s extremes.
No matter the application, NANUK durable protective cases clearly offer superior performance. Rugged, dependable, and efficient; NANUK impact resistant and tough hard sided cases will never let you down.Reinforced Metal Padlock Holes
Stainless steel reinforced padlock holes let you lock down your gear so you can carry with confidence. NANUK padlocks are also available. TSA approved, these hard case padlocks are the perfect accessory for frequent flyers.
2-Stage Retractable Handle with Quick Release Button
Hassle-free transport comes courtesy of NANUK’s two-stage retractable handle, available with NANUK 935, 950 and 960. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed operation with its quick release button.
Polyurethane Wheels
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. All NANUK WHEELED cases come equipped with polycarbonate wheels over molded with polyurethane. Similar to what you find on roller blades, these wheels, along with their stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through a number of weather conditions.
Soft Grip Side Mounted Spring Loaded Handles
NANUK’s soft-grip handles make heavy transportation comfortable and convenient. On the 960 case you’ll find the added benefit of two extra-long, side mounted spring loaded handles that retract when released, minimizing the chances of damage during transit. These handles allow 2 people to carry the case with ease.
Removable Lid
The lid on many NANUK cases can be removed by pulling out the hinge pin on both sides of the case. This can be convenient when installing complex mechanical or electronic systems into the case.
*Please note that hand tools may be required to remove the hinge pins.Top and Bottom Panel Mount
Securing an outside faceplate with screws or rivets can weaken your case and compromise water resistance. NANUK solves this dilemma with its integrated bezel system. Found on the lower portion of all NANUK cases (and also the upper portion of several NANUK models), this solid inner lip is designed specifically for mounting and makes panel installation easy.
-
Accessories
Nanuk TSA PowerClaw Latch Retrofit Kit
Buy NowWe found a way to make our patented PowerClaw latches even better! They are now available with an integrated TSA accepted key lock. The easy to install retrofit kit can be installed on many* NANUK cases and adds another layer of security to your case. Each lock has a special code TSA001 to TSA003, which is used by the TSA, CATSA and other security agencies to know which secure tool to use to open the lock. TSA accepted latches are the perfect accessory for storing, securing and protecting valuable items at home, on the job site and in your vehicle.
*Compatible with the following NANUK cases:
908 | 918 | 920 | 925 | 933 | 935 | 940 | 945 | 950 | 960
EACH KIT CONTAINS:
2x TSA Powerclaw latches
2x Coded TSA keys
4x installation pins (2x short, 2x long)
FREE installation when purchased together with a compatible NANUK case on plasticase.com onlyFoam Insert for Nanuk 960
Buy NowMade of high quality polyurethane foam, the multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case. This solution is ideal if you are seeking a quick and easy way to protect and organize your items.
Padded Divider with egg shell foam insert for Nanuk 960
Buy NowPadded Divider with egg shell foam insert for 960 Nanuk Case
Bottom Aluminium Waterproof Panel Kit for the Nanuk 960
Buy NowWaterproof Panel Kit for the 960 Nanuk Case (B) Aluminum
Top Polycarbonate Panel Kit for the Nanuk 960
Buy NowPanel kit for the 960 Nanuk Case (T) Polycarbonate
Bottom Polycarbonate Waterproof Panel Kit for the Nanuk 960
Buy NowWaterproof Panel kit for the 960 Nanuk Case (B) Polycarbonate
Nanuk TSA Padlock
Buy NowTSA padlocks offer the security of a padlock but can easily be opened and inspected by airport security and then locked again. A visual indicator lets you know when the lock has been opened with a TSA key.
-
Customization
Contact UsCustom Printing
What better way to make your mark than to have your company’s logo or product branding printed in color on our cases? Simply send us your artwork and our experienced graphic designers will work with you to convey your message in the most effective and unique way.
Custom Foam Interior
If your application requires a customized solution for holding the contents of your protective hard sided case, our custom foam interior option is the way to go. Custom foam interiors provide the absolute best protection and support for your delicate equipment. They ensure that there is no shifting of your equipment during transport within our tough protective cases, which could lead to scratches or damage. Furthermore, custom foam ensures that all surface areas receive the proper support within our durable protective cases, regardless of irregular equipment geometry.
Custom Panel Kit
Not just a watertight case: our case interior specialists can help you incorporate your electronic instruments into NANUK watertight cases. With our integrated panel kit system you can take full advantage of our OEM housing solution. Simply provide us with your equipment specifications and we will develop an innovative portable unit tailored specifically to your needs.
Custom Label
Plasticase has the experience and expertise to meet your case labeling requirements. Our printing department has the in-house capacity to help your project take shape and complete your order to your exact specifications. Simply send us your label design and we’ll make it happen.

Easy to move around, this protective case gets you through any terrain with its tough polyurethane wheels and three soft grip handles.

The two-stage retractable handle offers easy, one-handed operation with its quick release button

At 22 inches long and nearly 13 inches deep, the wheeled 960 can store a whole lot of your essentials.

Resistant to water, shocks and heavy impacts, it also features NANUK’s Powerclaw latching system.