Nanuk 923 DJI™ Ronin-S

Nanuk 923 DJI™ Ronin-S

Your DJI™ Ronin-S gets the maximum level of protection with this protective case. The foam is pre-cut for your Ronin-S and the smart design ensures all the delicate parts remain in place and properly organized.
  1. Specs

    Interior Dimensions

    L16.6″ x W11.3″ x H5.4″
    L422mm x W287mm x H137mm

    Exterior Dimensions

    L18.6″ x W14.4″ x H6.3″
    L472mm x W366mm x H161mm

    Weight (empty)
    6.9 lbs | 3.1 kg
    Temperature Range
    Min -20°F (-29°C ) Max 140°F (60°C)
    Lid Depth
    1.8″ | 46mm
    Base Depth
    3.6″ | 91mm
    lightweight NK-7™ resin
    Max Buoyancy
    40 lbs | 18.1 kg
    Airline Carry-On
    Waterproof (Ip67)
    conditional lifetime guarantee
    ATA 300 | ASTM D4169 | Mil-std-810f | IP67 Rating
  2. Features

    • Rubber Feet
    • TSA Powerclaw Latches
    • Spring Loaded Handle
    • PowerClaw Latching System
    • Waterproof - IP67 Rated
    • Padlockable
    • Shoulder Strap Attachment
    • Stackable
    • Handle Stay
    • Integrated Lid Stay
    • Stainless Steel Hardware
    • Rubber Feet

    Rubber Feet

    The integrated rubber feet provide a non skid surface that keeps the case in place during transport or when in use. The feet are also non marking and allow the case to be used on more delicate surfaces without scratching.

    • TSA Powerclaw Latches

    TSA Powerclaw Latches

    The patented NANUK Powerclaw latches just got better! Two TSA compliant keyed latches keep your case securely locked while allowing TSA agents to inspect the contents of the case when required.

    • Spring Loaded Handle

    Spring Loaded Handle

    NANUK’s soft-grip handles make heavy transportation comfortable and convenient. You’ll find the added benefit of an extra-long, spring loaded handle that retract when released, minimizing the chances of damage during transit.

    PowerClaw Latching System

    The PowerClaw latching system (US Patent No. 8,297,464) used on all NANUK cases is engineered to keep your case closed during the toughest of missions.

    The PowerClaw clamps the case tightly closed using compressive force while the integrated slide lock prevents the case from opening during transport or when dropped.

    The super tough nylon construction ensures your precious items remain safely inside the case no matter where the journey takes you.

    NANUK Waterproof Cases IP67 Rated (Submersion at 3ft for 30 min)

    The waterproofing seal used in all NANUK watertight cases is custom designed to fit our products. The seal is designed to resist deformation and fatigue, ensuring a long lasting watertight seal.

    Our waterproof cases are ideal for applications such as search and rescue, marine transportation / storage and diving. Any of our many dealers can easily outfit you with one of our waterproof cases, accessories or other products.

    NANUK equipment cases and transportation products are complete with a lifetime guarantee in materials and workmanship for the life of our products.


    Every NANUK case come equipped with two padlockable hasps moulded directly into the case for superior strength. High quality TSA approved combination padlocks are available as an option to keep your items secure within your case.

    Shoulder Strap Attachment

    Our neoprene shoulder strap incorporates Aircell™ comfort technology to reduce fatigue when transporting your case. The shoulder strap can easily be attached to all NANUK cases without any additional hardware.


    Each NANUK case is stackable with other cases of the same size. Integrated feet on the rear of the case interlock with the front of the case, allowing for multiple cases to be safely stacked on top of each other to save space or for transport.

    Handle Stay

    NANUK is tough and durable, but it does have a soft side. The handle structure is molded with our specially formulated high impact NK-7 resin but is over molded with a soft touch rubber for comfort. The soft shock absorbing material reduces fatigue when carrying heavy loads.

    The integrated stays keep the handle folded down to avoid damage during transport or shipping.

    Integrated Lid Stay

    NANUK comes loaded with innovative features. All models have integrated lid stays molded into the hinge that keep the case lid open when you need it to stay open. No more pinched fingers.

    Stainless Steel Hardware

    The hardware found on every NANUK case is marine grade 304 stainless steel. By using the highest quality materials available we can build a better case that will perform as well 10 years from now as it did on the day you purchased it.

  3. Accessories

    • Foam insert for Nanuk 923 DJI™ Ronin-S
    • Nanuk Desiccant Container
    • NANUK TSA accepted case lock
    • Foam insert for Nanuk 923 DJI™ Ronin-S Image 1

    Foam insert for Nanuk 923 DJI™ Ronin-S

    Replacement foam for Nanuk 923 DJI™ Ronin-S

    Buy Now

    Nanuk Desiccant Container

    NANUK reusable desiccant containers protect all types of sensitive gear from deterioration, corrosion, mold and other damage caused by moisture or high humidity. Simply place the desiccant container inside the case along with your items. The desiccant container will absorb up to 34% of its own weight in water vapor to rapidly remove moisture and keep your case dry to protect against damage.

    Silica gel beads are orange in color when active (dry). The gel beads will gradually change color from orange to green as they absorb moisture. Once the gel beads turn green, they are no longer active and must be heated to remove the accumulated moisture using a conventional oven at 250° F for 3 hours. Avoid overheating while drying. When the color of the gel beads returns to orange, the container is ready to be reused.

    Buy Now

    NANUK TSA accepted case lock

    Our new and improved TSA Accepted lock offers the security of a padlock but can easily be opened and inspected by airport security and then locked again. The improved design of the TSA accepted lock makes it easier to install and fit on all our NANUK case models. For maximum security always use two locks per case.

    Buy Now
  4. Customization

    Contact Us
    • Custom Label
    • Custom Label

    Custom Label

    Plasticase has the experience and expertise to meet your case labeling requirements. Our printing department has the in-house capacity to help your project take shape and complete your order to your exact specifications. Simply send us your label design and we’ll make it happen.


Write a Review